Marantz SR7300N - Manual (Page 31)

28
ENGLISH
BASIC OPERATION
(PLAY BACK)
SELECTING AN INPUT SOURCE.
Before you can listen to any input media, you must first select the input
source at the SR7300.
E.G. : DVD
To select DVD, simply press the DVD button on the front panel or
press DVD button on the remote.
After you have selected DVD, simply turn on the DVD player and play
the DVD.
• As the input source is changed, the new input name will appear
momentarily as an OSD information on the video display. The input
name will also appear in the display on the front-panel.
• As the input is changed, the SR7300 will automatically switch to the
digital input, surround mode, attenuation, and night mode status
that were entered during the configuration process for that source.
• When an audio source is selected, the last video input used remains
routed to the VCR1 & VCR2 Outputs and Monitor Outputs. This
permits simultaneous viewing and listening to different sources.
• When a Video source is selected, the video signal for that input will
be routed to the Monitor Outputs jack and will be viewable on a TV
monitor connected to the SR7300.
If a component video input is connected to the DVD or DSS
component inputs, it will be routed to the Component Video
Output. Make certain that your TV is set to the proper input to view
the signal.
SELECTING THE SURROUND MODE
E.G. : AUTO SURROUND
To select the surround mode during playback, turn the SELECT knob
on the front panel or press the surround mode button on the remote .
ADJUSTING THE MAIN VOLUME
Adjust the volume to a comfortable level using the VOLUME control
knob on the front panel or VOL
/ buttons on the remote.
To increase the volume, turn the VOLUME knob to the clockwise or
press VOL
button on the remote, to decrease the volume, turn to the
counterclockwise or press VOL button on the remote.
Notes:
• The volume can be adjusted within the range of –
∞ to 18 dB, in
steps of 1 dB.
• However, when the channel level is set as described on page 24,
if the volume for any channel is set at +1 dB or greater, the
volume cannot be adjusted up to 18 dB.
(In this case the maximum volume adjustment range is “18 dB -
Maximum value of channel level)
ADJUSTING THE TONE (BASS & TREBLE)
CONTROL.
During a listening session you may wish to adjust the Bass and Treble
Control to suit your listening tastes or room acoustics.
(using the SR7300)
To change the selector mode , press SELECT button, until "BASS" or
"TREBLE" is shown on front display.
Turn the SELECTOR knob to desired level of tone control.
(Using the remote control unit)
To adjust the bass effect , press BASS or BASS on the remote.
To adjust the treble effect , press TREBLE or TREBLE on the
remote.
Notes :
• The tone control function can work in the AUTO Surround,
Stereo, Dolby PL2, DTS, DTS-ES, and Multi Ch. Stereo mode.
AV SURROUND RECEIVER SR7300
SURROUND
MEMORY TUNING MODE F/P CLEAR
S-DIRECT MULTIROOM A/D 7.1CH INPUT SPEAKRS A/B
POWER ON/STANDBY PHONES
ENTER
STANDBY DSS/VCR2 AUX1 AUX2 VCR1 DVD TV CD CD-R TAPE TUNER
SELECT
UP
VOLUME
DOWN MEMORY TUNING MODE F/P CLEAR
S-DIRECT MULTIROOM
MUTE
A/D 7.1CH INPUT SPEAKRS A/B
AUX1 INPUT S-VIDEO DIGITAL VIDEO L AUDIO R
DSS/VCR2 AUX1 AUX2 VCR1 DVD TV CD CD-R TAPE TUNER
ATT
AV SURROUND RECEIVER SR7300
SURROUND
MEMORY TUNING MODE F/P CLEAR
S-DIRECT MULTIROOM A/D 7.1CH INPUT SPEAKRS A/B
POWER ON/STANDBY PHONES
ENTER
STANDBY DSS/VCR2 AUX1 AUX2 VCR1 DVD TV CD CD-R TAPE TUNER
SELECT
AV SURROUND RECEIVER SR7300
SURROUND
MEMORY TUNING MODE F/P CLEAR
S-DIRECT MULTIROOM A/D 7.1CH INPUT SPEAKRS A/B
POWER ON/STANDBY PHONES
ENTER
STANDBY DSS/VCR2 AUX1 AUX2 VCR1 DVD TV CD CD-R TAPE TUNER
SELECT