Connecting a 2-channel audio amplifier, Av pure direct connection – Marantz UD7007 User Manual
Page 11
8
AV Pure Direct connection
This shows how to make a connection in order to use the AV Pure Direct function.
IN
HDMI
IN
HDMI
The MONITOR(VIDEO) connector outputs video signals.
The AMP(AUDIO) connector outputs audio and black video signals.
To use the AV Pure Direct function, you must change the Pure Direct setting.
For how to change this setting, see (
) .
Connecting to a device equipped with a DVI-D connector
Use an HDMI DVI-D conversion cable.
• The audio signal is not output. Make the appropriate audio connections for your devices.
• The video signal will be in RGB format.
• You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content
copyright protection system).
• Video may not be output depending on the combination of devices.
HDMI connections
Connecting a 2-channel audio amplifier
This connection is for playback of audio of this unit, using a 2-channel audio device.
For software recorded in multi-channel, an analog signal down-mixed to 2-channel is output.
R
L
R
L
AUDIO
R
L
IN
AUDIO
AUDIO
L
R
IN
AUDIO
Amplifier
AV Receiver
TV
Amplifier
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
DVD