Remote control connection, Connecting the power cord, Connection – Marantz UD7007 User Manual

Page 15: Setting, Flasher input

Advertising
background image

12

Connecting the power cord

After completing all the connections, insert the power plug into the power outlet.

To household power outlet

(AC 120 V, 60 Hz)

Power cord (supplied)

NOTE

Do not plug in the power cord until all connections have been completed.
• Do not bundle power cords together with connection cables. Doing so can result in humming or noise.

Remote control connection

When you use this unit connected to a marantz amplifier, this unit receives operation signals sent from the
amplifier and operates accordingly.

Connection

Use the supplied remote control cable to connect the REMOTE CONTROL IN connector of this unit to
REMOTE CONTROL OUT connector of the amplifier.

Setting

Set the remote control switch on the rear panel of this unit to“EXT. (EXTERNAL)” to use this feature.
• This setting will disable remote sensor reception of this unit.
• To operate the unit, point the remote control at the remote sensor of the amplifier.

To use this unit without connecting it to the amplifier, set the remote control switch to “INT. (INTERNAL)”.

Amplifier

Remote control cable
(supplied)

Set to “EXT. (EXTERNAL)”

This unit

Flasher input

This is used when controlling components from different rooms with a keypad or other input device.
Set the remote switch to “INT. (INTERNAL)” when using a flasher input.

Basic v

ersion

A

dv

anced v

ersion

Inf
or

mation

Basic v

ersion

DVD

Advertising
This manual is related to the following products: