Marantz UD7007 - Manual (Page 12)

9
Connecting a USB memory device to the USB port
• You can enjoy music, video and photo stored on a USB memory device.
• For operating instructions see “Playing files (MEDIA PLAYER)” (
vpage 19 ).
To connect a USB memory device to this unit.
USB memory
device
• marantz does not guarantee that all USB memory devices will operate or receive power. When using
a portable USB connection type HDD of the kind to which an AC adapter can be connected to supply
power, use the AC adapter.
• If the “USB“ indicator does not light, turn the power off, reinsert the USB memory device, and turn the
unit on again.
NOTE
• USB memory devices will not work via a USB hub.
• It is not possible to use this unit by connecting the unit’s USB port to a PC via a USB cable.
• Do not use an extension cable when connecting a USB memory device. This may cause radio interference
with other devices.
• Be sure to turn the power off when inserting or removing a USB memory device. Data stored in the USB
memory device or the memory of the unit may be damaged.
• Compatibility of all USB memory devices is not guaranteed.
• For reformatting a USB memory device, format it with FAT16 or FAT32.
Connecting to a device equipped with coaxial digital
audio input terminals
This connection is for playback of audio of this unit, using an audio device with coaxial digital audio input
terminals.
AUDIO
COAXIAL
IN
Audio device
When multi-channel audio is to be converted to 2-channel audio and output, change the setting for a
connected Coaxial digital output to PCM from Bitstream, then make the setting for the sampling rate for
digital audio output, depending on the device (
vpage 44 “Down Sampling”).
NOTE
If you play back BD/DVD or other media with an incorrect configuration, a deafening noise occurs that may
damage your speakers.
Basic v
ersion
A
dv
anced v
ersion
Inf
or
mation
Basic v
ersion
DVD