Dish Network 512 - Manual (Page 24)

Page 19
Chapter 2
Receiver Description and Installation
Receiver Front Panel
Smart Card Door
Behind this door is a slot for a future smart card. No smart card is included with
this receiver.
Arrow Buttons
You can use the ARROW buttons to change satellite channels displayed on your
TV. From within a menu, use these buttons to move the highlight up or down.
Indicators
• TV1 Power - The green light indicates that the receiver is providing
programming to your TV through the rear-panel TV1 output connections.
• Recording - The red light indicates that the DVR is recording an event.
Buttons
The buttons on the receiver give you some control of the receiver. However,
most of the time you will want to use the remote control that came with your
receiver.
•
System Info - Displays the receiver’s System Info screen on your TV.
• Menu - Displays the Main Menu . After you press this button, use the
ARROWS and SELECT buttons to navigate through the menus.
• Arrows/Select - Use the ARROWS and SELECT the same way as the
ARROW and Select buttons on the remote control.
• Power - Press the POWER button to turn satellite programming on or off
to your TV.
IR Sensor
The INFRARED (IR) SENSOR receives IR signals from the remote control.