Dish Network 512 - Manual (Page 89)

Chapter 3
Page 84
Using the System
Receiver Updates
Your satellite receiver is set to turn itself off at 3:00 a.m. so that it can receive
updates to the Program Guide . To change this update time, complete the
following:
1. Press the MENU 8-5 to open the Updates screen.
2. Highlight the Time Set option.
3. Use the UP and DOWN ARROW buttons to highlight the time.
4. Go to the AM/PM option and use the UP and DOWN ARROW buttons to
select AM or PM .
5. Select Done to save your changes and exit this screen.
Note : You can reset any changes you may have made to the Updates
feature by selecting the Defaults option before exiting this screen.