Dish Network 512 - Manual (Page 66)

Page 61
Using Timers
3. Select the event timer that you want to edit. A mark appears in the box next
to the event timer.
4. Select the Edit option. You may change the Timer Type , Timer Frequency ,
or Channel . To do this, select each option that you want.
5. If you want to change the Start Time , the End Time , or the Date , select the
Edit Time option to display the Edit Time for Manual Timer menu.
Otherwise, skip to step 8 of this procedure.
6. Use the NUMBER PAD buttons to enter the Start Time
(this includes selecting AM or PM) and the End Time
(this includes selecting AM or PM).
7. Use the NUMBER PAD buttons to enter the Date .
8. Select the Create Timer option.
Deleting an Event Timer
1. Press the MENU button.
2. Select the Timers option.
The receiver displays the Timers menu.
3. Select an event timer(s) that you want to delete. A check mark appears in
the box next to the event timer(s).
4. Move the highlight to Delete and press SELECT.
Special Considerations When Using Event Timers
• For Any Locked Programs - You must enter the receiver password before
you can create an automatic event timer. You can create a manual event
timer for a locked program without entering the password. However, if you
do this, when the event timer operates, the receiver may display only an
error or password-entry screen.
• For Pay-Per View-Programs - You must order a pay-per-view program
when you create a timer for it. This timer is an Automatic Event Timer.