Montigo MW34 DV - Manual (Page 13)

Page 13 of 21
W3400 Gas Fireplace
Pull bottom of door
surround outwards
and upwards.
Glass door
and frame
Door surround
Tab 'B'
Slot 'A'
Magnet
Installation
Removing and Installing
the Door
Removing the door surround:
The door surround is held in place by two metal clips at the top, and
one magnet on each side. To remove the surround, pull the bottom
outwards and lift upwards until the slots "A" are clear of tabs "B" in
the door. You may need to use a flat screwdriver to pull the door
surround outwards. (See figure 23a).
Machine Screws
Door Rail Tabs Glass door
& frame
Removing the door:
To install/remove the glass door, simply attach/remove the ten (10)
machine screws that hold door in place (See figure 23b). Ensure that a
good seal is maintained when installing the door.
Figure 23b. Removing or installing the glass door.
Figure 23a. Removing or installing the door surround.