NavCom TS Factory Default User Manual
NavCom Equipment
Advertising
Troubleshooting Guide – Factory Default Configuration
This guide will step you through resetting the GPS receiver to the Factory Default configuration via NavCom’s
StarUtil GUI program.
Please do not use this without any approval from NavCom’s Customer Support.
Using this multiple times can corrupt NVRAM.
Perform the following steps to establish communication:
9
Make sure that the GPS receiver is navigating
and tracking satellites.
9
Establish communication to GPS receiver’s
Control Port.
9
View
→
9
A0 - Alert.
9
Receiver
→
9
Commands
→
9
Key… for Key Command window.
9
Type
in
NV,-1
and click OK.
Rev. A
i
Release - Jan 07
Advertising