Nevion SDI-TD-MUX-4 - Manual (Page 10)

SDI-TD-MUX-4 / SDI-TD-DMUX-4 Rev. N
nevion.com | 10
Figure 4: The MUX info page in Multicon GYDA.
From the text table, we can read the following: All four cable equalizers are enabled
(“Normal”), as opposed to “Bypassed”. Of the four reclockers, only reclocker 1 has been able
to lock to an input signal. That reclockers 2-4 are unlocked can also be seen from the three
red crosses in the block representation. The locked input is indicated as 270Mbps SD-SDI.
The error counter has found no errors for input 1 (at least not errors of the types that should
be counted), but plenty of errors for inputs 2-4. We can also tell that the voltages are
reasonably close to their nominal values. And last, since this is a board with the laser option,
we can see that the laser is powered and what kind of laser it is (wavelength, power and
type).