Nevion 3GHD256256L - Manual (Page 22)

3GHD256256L / SD256256L Rev. E
nevion.com | 22
The slide switch: The knob must always stay in the position away from the card front. The
slide switch is for factory use only.
3.7 Flashlink section
The Flashlink section in the upper, left part of the router makes it possible to switch signals
via Flashlink modules and even from one module to another. In this way several Flashlink
functions can be introduced in the signal path.
Please contact Nevion Sales Dept., or your local Nevion representative for a complete
survey of Flashlink modules that are available for this purpose.
There are four slots for Flashlink modules and one for the 15V PSU module available in the
VikinX Modular 256x256 frame.
For connection to/from the router there are a total of 32pcs. SMA connectors; 2x8 inputs (two
and two in parallel) and 16 separate outputs.
The layout (seen from the front of the router) is as follows: