Nortec LiveSteam v.2 - Manual (Page 20)

17 | LS Installation Manual
Step 3
1. Insert hex wrench as
illustrated.
2. Rotate wrench 2 turns counter-
clockwise.
3. Lock actuator by pressing
wrench towards actuator and
rotating 1/8 turn clockwise.
Figure 22: Step 3
Step 4
1. Thread actuator on to valve.
2. Tighten valve mounting nut.
Figure 23: Step 4
Step 5
1. Align stem extension hole with
actuator shaft hole.
2. Insert connecting pin.
3. Tighten jam nut against valve
stem.
4. Release Actuator by turning
hex key 1/8 turn counter-
clockwise.
5. The actuator should be putting
tension on the stem and holding it
closed (up position).
Figure 24: Step 5