System 2 - in duct near an elbow – Nortec LiveSteam v.2 User Manual
Page 7
LS Installation Manual | 4
System 2 - In Duct Near An Elbow
Note: If not calculated, dimension “X” is minimum 6’ before or after bend or transition. See up flow
effect on page 6 for calculation.
Figure 3: In Duct Near An Elbow
Table 2: In Duct Near An Elbow
Location
Advantages
Disadvantages
LOC. 1
MOST recommended. More
air on the outside of the turn.
Uneven air flow in the duct.
LOC. 2
Even air flow over the whole
duct.
Possibility of wetting of the
turning vanes.
Warning: This type of distributor may produce a whistling noise as the pressurized steam decompresses
within the distributor and is introduced into the airstream. This noise may be increased with higher
pressure applications. For noise dampening recommendations, please consult the factory.