Nortec Air Humidification System BS - Manual (Page 4)

25.05.05-A page 4 of 30
1. Introduction
1.1 Right at the beginning
Thank you for deciding on the DRAABE air humidification system BS.
The air humidification system BS was constructed according to the present-day state of the art
and the approved safety requirements. Nevertheless dangers may arise for the user and / or
third persons and / or tangible assets may be damaged in case of improper usage of air
humidification systems.
In order to ensure a safe, proper and economical operation, please pay attention to and follow all
specifications and notes on safety contained in this technical documentation.
If you have any queries about matters which are not dealt with in this document, or if you need
more details, please contact your local NORTEC regional distributor, or call our Service
Hotline (+1 613 822 0335). They will be glad to help.
1.2 Notes on technical documentation
Definitions
This technical documentation deals with the DRAABE air humidification system BS in its
construction versions BS5, BS10.
The explanations contained in this technical documentation are limited to:
- the planning of an air humidification system BS.
- the installation, the operation and the maintenance of the air humidification system BS
The technical documentation is supplemented by various separate documentation sheets
(leaflets, order forms, etc.). Relevant cross-references to these publications can be found within
this technical documentation whenever necessary.
Agreement
This symbol marks notes concerning safety and dangers. In case of non-compliance, physical
injuries and / or material damage may be the result. Notes concerning safety and dangers are also
marked with CAUTION.
This symbol marks important notes. These are also referred to by NOTES.
[You find this symbol on the type plates of all devices (atomisers, etc.). It requests you to read through the
technical documentation before performing any action on the system. In the case of ambiguity after
reading through the technical documentation, you are requested to contact the technical customer service
of the manufacturer at first before any action is carried out.
!