OpenEye VS201 - Manual (Page 22)

22
System
Note
The System tab is only accessible by the Administrator.
System
Host Name – The Host Name is used to identify the network device on your system. If
camera based Motion Detection is enabled and is set to send alarm message by
Mail/FTP, the host name entered here will display in the alarm message.
Time Zone – Select your time zone.
Sync With Computer Time – Select to synchronize the network device date and time
with the connected DVR.
Manual – Set video date and time manually.
Sync with NTP server – Network Time Protocol (NTP) is an alternate way to synchronize
your network device’s clock with a NTP server. Specify the server you wish to synchronize
in the NTP Server box. Then select an Update Interval. For more information about NTP,
visit www.ntp.org.