OpenEye VS201 - Manual (Page 5)

30145AB 5
Installation and Storage
•
Install electricity wiring carefully. Please note that input electricity to the unit is at
tolerance of DC 12V 10%.
•
Do not install the camera in areas of extreme temperatures in excess of the allowable
range. (-50°C ~50°C / -58°F ~ 122°F)
•
Avoid installing in humid or dusty places. The relative humidity must be below 90%.
•
Avoid installing in places where radiation is present.
•
Avoid installing in places where there are strong magnetic fields and electric signals.
•
Avoid installing in places where the encoder would be subject to strong vibrations.
Regulation
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This symbol on the product or on its packaging indicates that this product
shall not be treated as household waste in accordance with Directive
2002/96/EC. Instead it shall be handed over to the applicable collection
point for the recycling of electrical and electronic equipment. By proper
waste handling of this product you ensure that it has no negative
consequences for the environment and human health, which could
otherwise be caused if this product is thrown into the garbage bin. The
recycling of materials will help to conserve natural resources.
For more details information about recycling of this product, please
contact your local city office, your household waste disposal service or
the shop where you purchased the product.
Compliance is evidenced by written declaration from our suppliers,
assuring that any potential trace contamination levels of restricted
substances are below the maximum level set by EU Directive
2002/95/EC, or are exempted due to their application.