Pacific Research Solutions RI-200 User Manual
Page 2
Pacific Research Solutions
RI-200 User Manual
Page 1
TABLE OF CONTENTS
INTRODUCTION .................................................................................................................... PAGE 5
1.
GETTING STARTED ................................................................................................. PAGE 6
1.0
Quick Start
1.1
Unpacking the RI-200
1.2
Mounting the RI-200 Repeater Controller
1.2.1
Interface Your Receiver and Transmitter
1.3
Installing the RI-210 Repeater Controller
1.4
Setting up your Repeater Controller
1.4.1
Default User Command
1.4.2
Setting up your ID
1.4.3
Setup CTCSS/DCS Decode
1.4.4
Set CTCSS/DCS Encode
1.4.5
Your Controller Serial Number
1.4.6
Changing Your Password
1.5
Auxiliary Input and Output
1.6
Programming Software
2.
REPEATER INTERFACE ........................................................................................ PAGE 13
2.0
Repeater Interface
2.1
Proper Techniques for Quality Repeater Audio
2.2
Power Supply Connections
2.3
Repeater Receiver Audio Connections
2.4
Repeater Transmitter Audio Connections
2.5
Repeater Transmitter PTT or Transmitter Keying Connections
2.6
Digital Inputs
2.7
Digital Outputs
2.8
Connecting two Repeater Controller together
3.
OPERATING and ADJUSTING the CONTROLLER ............................................ PAGE 16
3.0
Operating
3.1
System Status Indicator
3.2
DTMF Command Inputs
3.3
Telemetry Messages
3.4
Setting audio levels
3.4.1
Setting Receiver Input Gain
3.4.2
Setting Squelch Stage Gain
3.4.3
Adjusting the Transmitter
3.5
SmartSquelch and Normal Squelch Operation
3.6
CTCSS decode and encode operation
3.7
DCS decode and encode setup and operation
3.8
Initialization Procedure
3.9
Event Scheduler
4.
PROGRAMMING ..................................................................................................... PAGE 22
4.0
Programming
4.1
Programming Command Format
4.2
Password Access
4.2.1
Auxiliary Controller Password Access
4.3
Valid S-Command and Macro Data
4.4
Leading Zero rules for S-Command data