Datalogic Scanning MAGELLAN 1000I - Manual (Page 105)

Code 128
Product Reference Guide 5-31
Code 128
The following options apply to the Code 128 symbology.
Disable/Enable Code 128
When this feature is disabled, the scanner will not read Code 128 bar codes.
Transmit Function Characters
Enables/disables transmission of Code128 function characters 1, 2, 3, and 4.
Function codes are transmitted as follows:
• FNC1 = 80 hex
• FNC2 = 81 hex
• FNC3 = 82 hex
• FNC4 = 83 hex
START / END
PROGRAMMING BARCODES
Disable Code 128
Enable Code 128
DEFAULT
START / END
PROGRAMMING BARCODES
Don’t Transmit Function Characters
DEFAULT
Transmit Function Characters