Datalogic Scanning MAGELLAN 1000I - Manual (Page 107)

Code 128
Product Reference Guide 5-33
Code 128 — continued
Code 128 Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to Appendix C, Alpha-Numeric Pad and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
Code 128 Conversion to Code 39
Enables/disables expansion of Code 128 labels to Code 39.
NOTE
For Code 128 bar codes, only the data charac-
ters are included in the length calculations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 080
START / END
PROGRAMMING BARCODES
Disable
DEFAULT
Enable