Code 93 — continued – Datalogic Scanning MAGELLAN 1000I User Manual
Page 124
Advertising
Symbologies
5-50
Magellan
®
1000i
Code 93 — continued
Code 93 Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad
and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
NOTE
For Code 93 bar codes, only the data characters
are included in the length calculations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 001
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 050
Advertising