Codabar — continued – Datalogic Scanning MAGELLAN 1000I User Manual
Page 118
Symbologies
5-44
Magellan
®
1000i
Codabar — continued
Codabar Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to
Appendix C, Alpha-Numeric Pad
and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
Quiet Zones
This feature enable/disables the requirement that quiet zones must be present for Codabar bar
codes.
NOTE
For Codabar bar codes, all start, stop, check
and data characters are included in the length
calculations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 003
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 050
START / END
PROGRAMMING BARCODES
Don’t require Quiet Zones
DEFAULT
Require Quiet Zones