Datalogic Scanning MAGELLAN 1000I - Manual (Page 129)

MSI/Plessey
Product Reference Guide 5-55
MSI/Plessey — continued
MSI/Plessey Length 1, Length 2 Programming Instructions
1. Scan the START bar code.
2. Scan either the Set Length 1 or Set Length 2 bar code.
3. Turn to Appendix C, Alpha-Numeric Pad and scan the three digits (zero padded) represent-
ing the length in decimal notation.
4. Scan the END bar code.
NOTE
For MSI/Plessey bar codes, all check and data
characters are included in the length calculations.
START / END
PROGRAMMING BARCODES
DEFAULT SETTING FOR THIS FEATURE: 004
Set Length 1
Set Length 2
DEFAULT SETTING FOR THIS FEATURE: 016