Posiflex LS-1000 - Manual (Page 170)

162
OMNIDIRECTIONAL SCANNER PROGRAMMING GUIDE
Code 39 Parameters Setting
The scanner can be programmed to support the standard code 39
or Full ASCII code 39. In addition, it is user’s option to transmit or
not to transmit the start and stop characters. You can also enable
or disable the check digit feature. If the check digit feature is
enabled, you have the further option to decide whether the check
digit is transmitted or not.
Character Set
Standard code 39
To prevent confusion in code scanning, cover the
unwanted label and present the desired barcodes one by
one to the scanner.
FULL ASCII code 39