Posiflex LS-1000 User Manual
Page 187
Advertising
179
OMNIDIRECTIONAL SCANNER PROGRAMMING GUIDE
5. Data Redundant Check
In this section, users can set decoder data redundant check before
it is accepted as a good read. A higher data redundant check read
setting offers more assurance that a bar code has been read
correctly while a lower setting allows faster scanning performance.
Codabar data redundant check = 0
To prevent confusion in code scanning, cover the
unwanted label and present the desired barcodes one by
one to the scanner.
Codabar data redundant check = 1
Advertising