Posiflex LS-1000 - Manual (Page 9)

1 ADVANCED PROGRAMMING GUIDE
1. INTRODUCTION
This is an advanced programming guide for varies omnidirectional laser
scanners. This guide contains a series of programming barcode labels,
and by scanning these codes, it can make configurations to the scanners.
This allows decoding options and interface protocols to be tailored to a
specific application. The configuration is stored in non-volatile memory
and will not be lost by removing power from the scanner. Other than
specified in this guide, for any special functions or specifications, please
contact your dealer for details.
The scanner must be properly powered before programming. For
RS-232C type scanners, an external power adapter must be used to
supply DC power to the scanner. If a keyboard emulation type scanner
is used with an IBM PC/XT/AT, PS/2 or any fully compatible computers,
power will be drawn from the keyboard port; therefore no external power
adapter is required. If keyboard emulation type scanner is used with any
other non IBM PC compatible computers, an external power adapter may
be required.
Under the programming mode, the laser scanner will acknowledge a good
and valid reading with a short beep. It will give long beeps for either an
invalid or bad reading.