Posiflex LS-1000 - Manual (Page 47)

39
OMNIDIRECTIONAL SCANNER PROGRAMMING GUIDE
Barcode Identifier Code
Setting
The scanner can transmit maximum 2 digits barcode identifier code
for different types of barcodes. Use Enable or Disable identifier
setting barcode to determine the transmission of barcode ID.
The procedure is as follows:
1.) Scan Enter/Exit Programming Mode label
2.) Scan Barcode Identifier Setting Code label
3.) Scan the new code mark from ASCII table (maximum 2 digits).
For example, if AB is the code mark, then scan A and B.
4.) Scan Save Setting to Confirm label
5.) Scan Enter/Exit Programming Mode label