Chinese post code parameters setting – Posiflex LS-1000 User Manual
Page 204
196
OMNIDIRECTIONAL SCANNER PROGRAMMING GUIDE
Chinese Post Code Parameters Setting
In this section, there are varies Chinese post code symbologies
including:
•
Data redundant check
•
Min./Max. length setting
1. Chinese Post Code Reading Length Setting
The default Chinese post code length is 10 ~32 character. It can
be set at minimum 1 digit and maximum 62 digits.
In order to avoid missing characters when scanning is
incomplete, we recommend using a short-range length or fixed
length.
CODE LENGTH SETTING PROCESS
Programming Minimum or
Maximum label
Scan two number labels from
Code39 FULL ASCII table.
Example: For 4 character length,
scan 0 and 4
Scan Save setting to confirm
label to confirm your choice into
memory