Posiflex LS-1000 - Manual (Page 4)

Radio Notice
Some equipment generates uses and can radiate radio frequency energy.
If not installed and used in accordance with the instructions in this manual,
it may cause interference to radio communications. The equipment has
been tested and found to comply with the limits for a Class A computing
device pursuant to EN55022 and 47 CFR, Part 2 and Part 15 of the FCC
rules. These specifications are designed to provide reasonable
protection against interference when operated in a commercial
environment.
Radio and Television Interference
Operation of this equipment in a residential area can cause interference
to radio or television reception. This can be determined by turning the
equipment off and on.
The user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient the receiving antenna.
Relocate the device with respect to the receiver.
Move the device away from the receiver.
Plug the device into a different outlet so that the device and the receiver
are on different branch circuits.
If necessary, the user may consult the manufacturer, authorized dealer, or
experienced radio/television technician for additional suggestions. The
user may find the following booklet prepared by the Federal
Communications Commission helpful: “How to Identify and Resolve
Radio-TV Interference Problems.” This booklet is available from the U.S.
Government Printing Office, Washington, DC 20402 U.S.A., Stock No.
004000003454.
For CE-countries
This scanner is in conformity with CE standards. Please note that an
approved, CE-marked power supply unit should be used in order to
maintain CE conformance.