Posiflex LS-1000 User Manual
Page 202
Advertising
![background image](/files/801235/content/doc202.png)
194
OMNIDIRECTIONAL SCANNER PROGRAMMING GUIDE
3. Data Redundant Check
In this section, users can set decoder data redundant check, before
it is accepted as a good read. A higher data redundant check read
setting offers more assurance that a bar code has been read
correctly, while a lower setting allows faster scanning performance
ITF 25 data redundant check =0
To prevent confusion in code scanning, cover the
unwanted label and present the desired barcodes one by
one to the scanner.
ITF 25 data redundant check = 1
Advertising