Quantum Composers Jewel Laser - Manual (Page 3)

Jewel Manual v1.1 | Quantum Composers Page 3
This manual contains the information necessary to operate and maintain the Quantum
Composers Jewel Laser. It provides information for setup and installation, operation, service,
preventive maintenance, and troubleshooting (fault isolation). Generally, each topic has its own
section and no section assumes knowledge of information from other sections.
This laser is truly “turn-key” and has been shipped fully functional. Only minor adjustments are
necessary after installation. The connections are sized, keyed or labeled to increase the
simplicity of installation.
Technical Support
For questions or comments about operating the Jewel Laser the Quantum Composers technical
staff can be reached via one of the following methods:
 Phone - (406) 582-0227
 Fax - (406) 582-0237
 Internet - www.quantumcomposers.com
Warranty
The Jewel Laser has a one-year limited warranty from the date of delivery. This warranty covers
defects in materials and workmanship. Quantum Composers will repair or replace any defective
unit. Contact the Quantum Composers Service Dept. for information on obtaining warranty service.
Package Contents
The box you receive should contain the following:
 Jewel Laser
 Safety Key
 Shorting Jumper (Ext Intlk / Rmt Itlk)
 Power Supply, with AC Power Cord
 User’s Manual and Control Software on Disk
Contact Quantum Composers (406) 582-0227 if any parts are missing.
1. Introduction