RGBLink VSP 628S User Manual - Manual (Page 68)

5. Communication Software Guideline
How to control processor through RS232?
VSP 628S User Manual 68
Check and tap【Serial】, Serial Port , for example, is COM6 which is
checked from device manager. Set VSP 628S Baud Rate to be :115200,
Click【Confirm】after setting.
Click 【 open serial】, check if【COM】icon on the bottom right corner,
when there is the prompt green showing on the
software, it means the communication is ok , and you can use the software
to control the device now.
Note
If power off during communication, should close
the por t , by first, and plug in out of the USB
and do communication.