Communication software control guide – RGBLink VSP 628S User Manual User Manual
Page 75
Advertising
5.
Communication Software Control Guide
How to Connect PC through LAN Interface?
VSP 628S User Manual 75
that of computer 192.168.0.XXX;
The fifth step
: Open windows control software, click
ico,
:
Interface display as below:
Select 【Enternet】:
Input equipment IP address, click 【OK】
。
Click
to open the serial port, if the 【Comm】button (in the
lower-right corner of the control software interface) is green, and log
outputs information smoothly, then you would control the device through
PC software.
Advertising