Interface and input signal option, System setup and operations – RGBLink VSP 628S User Manual User Manual
Page 77
6. System Setup and Operations
Interface and Input Signal Option
VSP 628S User Manual 77
Interface and Input Signal Option
NO
INTERFACE
NO
INTERFACE
1
Dial the code switch
13.14
SDI Input
2
10/100M Interface
15.16.17
CVBS Loop Out
3
USB Interface
18
S-Video Loop Out
4
RS232 Interface
19
VGA Loop Out
5.6.7
CVBS Input
20
DVI Loop Out
8
S-Video DIN 4
21
DVI Output
9
VGA Input
22
DVI+VGA DVI Output
10
DVI Input
23
CVBS Output
11
Sending card/SDI output
sending port
24.25
Switch and Power
12
SDI Loop Out
21. DVI is main screen output which mainly connected with sending card of
large screen, the VSP 628S support the follows:
SMPTE:1280x720P60,1280x720P50,1920x1080P50,1920x1080P60,,
VESA:800x600@60,1024x768@60,1024x768@75,1280x768@60,
1280x1024@60,1400x1050@60,1440x900@60,1600x1200@60,
1680x1050@60,1920x1200@60,2048x1152@60.
Please choice corresponding output and press button to confirm through
【OUTPUT RES】 of 【OUTPUT】 in 【MENU】, entering into and adjust
knob by left and right.