RGBLink VSP 628S User Manual - Manual (Page 78)

6. System Setup and Operations
Interface and Input Signal Option
VSP 628S User Manual 78
22. DVI+VGA is preview output interface, mainly through the display to
preview the signal which will be output, the output signal is the DVI video
signal and VGA video signal, it can connected with the displayer of DVI
interface and VGA interface display devices to monitor signal image.
Output signal through the DVI-I interface (Preview uses the standard DVI-I
interface, compatible VGA output, through the terminal switching VGA
output.) The supported resolution when output: VESA: 1024×768×60Hz.
15-17. Loop output interface of the signal source, it can output the inputted
signal without any treatment and change. This also is the big characteristic
of the VSP 628S, i.e. any input signal can be realized without changing its
format, the original image output.
23. CVBS is the composite signal interface, which can output PAL and
NTSC formats, output signal can access the TV or DVD, etc.
In addition to CONT part and the sending cards and the power and the
interface above-mentioned, other interface is video signal input
interface, this interface can input including DVI, HDMI and VGA, YPbPr,
CV, S terminal SDI, TP test signals.