Denon AVR-4306 - Manual (Page 46)

41
Basic Operation Basic Operation
Press the ON SCREEN button (in the AMP mode)
repeatedly until the “Tuner Preset Stations” screen
appears on the OSD.
Checking the preset stations
Recalling preset stations
The preset (broadcast) stations can be checked on the on screen
display.
2 Recalling preset stations from the remote
control unit
1
2
Select the memory block (A to G).
Watching the display, press the CHANNEL
button or NUMBER (1 to 8) button to select the
desired preset channel.
2 Recalling preset stations from the main unit’s
panel
1
2
Press the TUNING PRESET button.
Turn the FUNCTION knob and select the desired
preset channel.
1 Use the “Auto tuning” or “Manual tuning”
operation to tune in the station to be preset in the
memory.
Press the MEMORY button. 3
Press the CHANNEL button or NUMBER (1 to 8)
button to select the desired preset channel.
5
• To preset other channels, repeat steps 3 to 6.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
Preset memory
2 Press the TU (TUNER) button to select the
TUNER mode.
4
Press the MEMORY BLOCK (A to G) button.
The memory block can also be selected by pressing the
SHIFT button.
6
Press the MEMORY button again.
• Store the station in the preset memory.
TUNING PRESET CURSOR STATUS
FUNCTION
TU
MEMORY BLOCK
MEMORY
ON SCREEN
SHIFT
CHANNEL
NUMBER
TUNING
BAND
CURSOR
TUNER