Denon AVR-4306 - Manual (Page 52)

47
Basic Operation Basic Operation
2 Connections
Connect one side of the Ethernet cable (CAT-5) to the ETHERNET
terminal on the AVR-4306’s rear panel, the other side to the
router.
Internet radio
Modem
To WAN side
To LAN side port
To LAN side port
Router
Computer
LAN port/Ethernet port
2 Network settings
When using a broadband router (DHCP function), the network
settings are made automatically, so there is no need to make the
settings from the setup menu.
If the broadband router’s DHCP function is turned off, make the
“Network Setup” (
page 80, 81).
A ~ G : Preset memory blocks
• , ª : Character search
MODE : Configuration mode selection
MEMO : Preset and favorite registration
• , ª, 0, 1 : Cursor up, down, left and right
ENTER : Enter settings
CH +, – : Preset channel selection
1 ~ 8 : Preset numbers
Listening to Internet radio
The required system connections and settings must be made in
order to listen to Internet radio.
“Update?” appears on the display when connecting to an
Internet radio station for the first time.
1
Select the input source to “AUX/Net”.
• The “Network Audio” menu screen appears.
3 Connecting to an Internet radio station for the
first time:
Press the
ENTER or CURSOR G G button.
• The update screen appears.
2 Press the CURSOR D D or H H button to select
“Internet Radio”, then press the ENTER or
CURSOR G G button.
• The initial screen when not connected to the Internet is
displayed.
(Remote control unit
in the AMP mode)
FUNCTION CURSOR ENTER
(Main unit)
2 DTU (Digital tuner) system buttons
The digital tuner system buttons shown on the diagram below
are used for Network Audio operations.