Denon AVR-4306 - Manual (Page 56)

Advanced Operation
51
Advanced Operation
Remote control unit
Operating DENON audio components
AMP/LAST
MODE
SELECTOR
1 Press the MODE SELECTOR buttons to select the
component you want to operate.
• The icon for the selected mode flashes.
This function switches as shown below each time one of
the AMP button is pressed.
: AMP, ZONE2, ZONE3 or SYSTEM CALL
: TUNER
: DIGITAL TUNER
: SATELLITE or CABLE
: CD or CDR
: DVD or DVDR
: VCR or TAPE
: TV
Example:
Select “AMP” mode.
Select “ZONE2” mode.
Select “ZONE3” mode.
Select “SYSTEM CALL” mode.
2 Operate the audio component.
For details, refer to the component’s operating instructions.
It may not be possible to operate some models.
• When a remote control code is sent, the icon for the mode of
the device to which that code belongs flashes.
• When the AMP/LAST button is pressed, it is possible to switch
between the AMP mode (AMP, ZONE2, ZONE3 or SYSTEM
CALL) and the last selected non-amplifier universal mode (TU,
DTU, SAT/CBL, CD, DVD, VCR or TV).
Default state is to toggle AMP to SAT/CBL mode.