Denon AVR-4306 - Manual (Page 79)

74
Advanced Setup – Part 1 Advanced Setup – Part 1
5
Press the ENTER button to enter the setting.
• The “Advanced Playback” menu reappears.
3 Press the CURSOR F F or G G button to select
“Custom”.
Makes more detailed audio playback settings.
Advanced Playback
Setting the 2ch Direct/Stereo
Set this when you want to change the speaker settings when the
surround mode is set to the 2-channel Direct or Stereo mode.
1 Press the CURSOR D D or H H button to select
“Advanced Playback” at the “System Setup
Menu”, then press the
ENTER button.
• The “Advanced Playback” menu screen appears.
2 Press the CURSOR D D or H H button to select “2ch
Direct / Stereo”, then press the ENTER button.
• The “2ch Direct / Stereo” screen appears.
Example: This screen is displayed in function of the
settings made at “Speaker Configuration”,
“Subwoofer Setup”, “Distance” and
“Crossover Frequency”
4 Press the CURSOR D D or H H button to select the
setting, then press the CURSOR F F or G G button to
select the parameter.
2 Setting the front B speakers when the
surround mode is set to the 2-channel Direct
or Stereo
When “Front B” is selected at “Power Amp Assign” and
“Custom” is selected at this setting, the “Front B” setting is
displayed.
To play signals from the Front B speaker when in the 2-
channel Direct or Stereo mode, set “Used”.
Setting the Dolby Digital Setup
Sets the down-mixing method when not using a center speaker
or surround speakers.
1 Press the CURSOR D D or H H button to select
“Dolby Digital Setup” at the “Advanced
Playback” menu, then press the
ENTER button.
• The “Dolby Digital Setup” screen appears.
2 Press the CURSOR F F or G G button to select “ON”
if you want to use the Compression, “OFF” if
you do not want to use it.
ON:
The dynamic range is compressed automatically according to
the combination of speakers being used.
OFF:
The dynamic range is not compressed.
Set “Compression” to “ON” if it seems that sound is
distorted because the input level exceeds the allowable
input for the front speakers.
When a center speaker or surround speakers are not
connected, the sounds in those channels are directed to the
front speakers.
3
Press the ENTER button to enter the setting.
• The “Advanced Playback” menu reappears.