Water not high enough • overflow models – Scotsman CME256 AutoIQ User Manual
Page 50
Advertising
CM
3
- Water Not High Enough
• Overflow Models
– CME256, CME506, CME656
or CME806
– Water drains out thru
standpipe behind pump –
Max water level is top of
standpipe
– If standpipe is too low, or
water leaking out, sump
cannot fill high enough
• Unit must be level
• Correct setting is 2 and 5/8
inches from top of
adjustment nut to top of
sump wall
Advertising
This manual is related to the following products: