Scotsman NME1854 - Manual (Page 18)

1. The bin control uses devices that sense light,
therefore they must be kept clean enough so that
they can “see”. At least twice a year, remove the
bin control sensors from the base of the ice chute,
and wipe the inside clean, as illustrated.
2. The ice machine senses water level by a probe
located in the water reservoir. At least twice a year,
the probe should be removed from the reservoir,
and the tip wiped clean of mineral build-up.
NME1854 & FME2404
January 2000
Page 18
ICE LEVEL SENSORS:
SLIDE TO REMOVE
CLEAN THE
LIGHT SENSORS
SENSOR MAINTENANCE
These steps must be followed for both systems.
Clean the Probe's Tip with ice
machine cleaner and a clean,
soft cloth.