Air cooled condenser maintenance, Clean or replace the air filters regularly – Scotsman NME1854 User Manual
Page 20
Advertising
NME1854 & FME2404
January 2000
Page 20
Clean or replace the air filters regularly.
Clean each air cooled condenser. Use a vacuum
cleaner or coil cleaner if needed. Do NOT use a
wire brush.
A. Remove top panel.
B. Remove two screws, and unplug the fan motors
C. Pull fan motor assembly off of locating pins and
out of the unit.
D. Clean the condenser; reassemble by placing the
fan motor assembly onto the locating pins,
replacing the mounting screws, plugging the fan
motors back in, and replacing the top panel.
Reconnect power.
FAN MOTOR
ASSEMBLY
CAP
SCREW
LOCATING
PINS
UNPLUG
LEADS
AIR COOLED CONDENSER MAINTENANCE
Moving Parts Hazard.
Disconnect electrical
power before beginning.
Advertising