Removal and replacement: fans – Scotsman NME1854 User Manual
Page 31
Advertising
REMOVAL AND REPLACEMENT: Fans
NME1854 & FME2404
January 2000
Page 31
Removing Condenser Fan Motor Assembly
1. Remove the top panel.
2. Unplug the two fan motor wire leads from the fan
motors.
3. Remove two hex head bolts from top end of fan
motor assembly, (see the illustration).
4. Lift up, and pull out the fan motor assembly.
5. Repair as needed.
6. To reassemble: Place the fan motor assembly
lower flange holes over the two allen head cap
screws in the base, and reinstall the hex head bolts
at the top of the assembly. Plug the fan motors
back in, and replace the top panel.
FAN MOTOR
ASSEMBLY
Electrical Shock Hazard
Disconnect electrical
power before beginning.
CAP SCREWS
LOCATING
PINS
FAN
MOTOR
WIRE
Advertising