Scotsman NME1854 - Manual (Page 3)

Installation Limitations:
This ice system is designed to be installed indoors,
in a controlled environment:
Min Max
Air Temperature 50 0 F 100 0 F
Water Temperature 40 0 F 100 0 F
Water Pressure 20 PSI 80 PSI
Voltage 198 VAC 253 VAC
(Compared to the nameplate)
Operating the machine outside of the limitations is
misuse and can void the warranty.
Water Limitations:
An ice machine is a food manufacturing plant; it
takes a raw material, water, and turns it into a food
product, ice. The purity of the water is very
important in obtaining pure ice and in maximizing
product life. This is not intended as a complete
resource for water related questions, but it does
offer these general recommendations:
1. Check with a water treatment specialist for a
water test, and recommendations regarding filters
and treatment.
2. In most cases, the water used to make ice
should be filtered or treated, depending upon the
water. There is no one type of water filter that will
be effective in all situations. That is why a water
test is important.
RO Water Limitation: Water conductivity must be
no less than 35 microSiemens/cm.
NME1854 & FME2404
May 2001
Page 3
Scotsman Ice Systems are designed and
manufactured with the highest regard for safety
and performance. They meet or exceed the
standards of UL, NSF, and CUL.
Scotsman assumes no liability or responsibility of
any kind for products manufactured by Scotsman
that have been altered in any way, including the
use of any part and/or other components not
specifically approved by Scotsman.
Scotsman reserves the right to make design
changes and/or improvements at any time.
Specifications and design are subject to change
without notice.
FOR THE INSTALLER: Environmental Limitations