Scotsman NME1854 - Manual (Page 2)

FOR THE INSTALLER
The FME2404 and the
NME1854 are modular flakers
designed to fit the following
Scotsman storage bins:
·
B90 and extensions (with bin
top KBT18)
·
BH800 no bin top required.
·
BH900 using bin top KBT14.
·
BH1366 or BH1666, no bin
top required.
When installing a new system,
check to be sure that you have
everything you need before
beginning:
·
Correct Bin
·
Correct Ice Machine
·
Correct Bin Top (if required)
·
All kits, legs, and information
required for the specific job.
NME1854 & FME2404
June 2002
Page 2
Model Series Dimensions
(w/o Bin)
W x D x H
Basic
Electrical Ice
Type Condenser
Type Minimum
Circuit
Ampacity Max.
Fuse
Size Refrigerant
Charge,
R-404A
FME2404AS-32 A or B 42" x 24" x 27" 208-320/60/1 Flake Air 21.0 25 30 oz
FME2404WS-32 A 42" x 24" x 27" 208-320/60/1 Flake Water 19.8 25 24 oz.
FME2404WS-32 B same 208-230/60/1 Flake Water 19.8 25 22 oz.
FME2404AS-3 A or B 42" x 24" x 27" 208-230/60/3 Flake Air 15.9 20 30 oz
FME2404WS-3 A 42" x 24" x 27" 208-230/60/3 Flake Water 14.6 20 24 oz.
FME2404WS-3 B same 208-230/60/3 Flake Water 14.6 20 24 oz
NME1854AS-32 A or B 42" x 24" x 27" 208-230/60/1 Nugget Air 21.0 25 30 oz
NME1854WS-32 A 42" x 24" x 27" 208-230/60/1 Nugget Water 24 oz.
NME1854WS-32 B same 208-230-60/1 Nugget Water 22 oz.
NME1854AS-3 A or B 42" x 24" x 27" 208-230/60/3 Nugget Air 15.9 20 30 oz
NME1854WS-3 A 42" x 24" x 27" 208-230/60/3 Nugget Water 14.6 20 24 oz.
NME1854WS-3 B same 208-230/60/3 Nugget Water 14.6 20 22 oz
* Per system. Always go by the nameplate
Minimum circuit ampacity is used to determine wire size and type per the National Electric Code.
Electrical Inlet
3"
Water Inlet 3
8
" Flare
Drain ¾" FPT
BACK VIEW
Note: Allow 6" behind and 6"
above the unit for air
circulation, utility
connections, and service.
Condenser Inlet (W/C):
3
8
" FPT
9.5"
Condenser Drain (W/C):
½" FPT
18.9"
18.74
15.8"
5.25"
14.9
TOP VIEW
34.84"
18.28"
6"
13.84"
SPECIFICATIONS: Ice Machine
Ice Chute
2.64" x 6.2"