Sierra Video 3232HD-3G - Manual (Page 17)

SIERRA VIDEO
7
Configuration
Ethernet Setup
Default IP settings;
IP Address- 192.168.1.200
Subnet mask- 255.255.255.0
Gateway IP Address- 0.0.0.0
Telnet Port- 10001
To configure the IP port, the routing switcher must first be connected to your PC. This
can be done by connecting an Ethernet cable (RJ45) between your PC and the routing
switcher directly, or the routing switcher may be added to your existing LAN network. The
routing switcher defaults to an IP address of 192.168.1.200 which will not conflict with
other devices in most systems. If there is an IP address conflict, direct connection must
be used to configure the routing switchers Ethernet port. The IP Address can also be
changed from the front panel (See the chapter on “Operation” for details.)
Once your PC and the routing switcher are on the same Ethernet network, open your
internet browser and type in the default address of the routing switcher in the address line
of the internet browser.
This will open a web page generated by the routing switcher. Routing switcher
information is displayed on this page.
Chapter 3