Sierra Video 3232HD-3G - Manual (Page 52)

SIERRA VIDEO
42
Power Saving Mode
 Press and hold the FUNC button until it turns BLUE.
 Press the Salvo button while holding the FUNC button.
The LOCK button will indicate the power saving mode.
 Blue if Enabled
 Off if Disabled
Toggle the LOCK button to enable and disable.
Error Indications
Power Supply Failure
If the system is configured for redundant power supplies and a power supply is missing,
the LOCK button will blink.
Routing switcher Configuration Fault
If there is a serious problem with the routing switcher where it cannot operate properly,
the LOCK and FUNC buttons will blink RED. All other buttons on the panel will be off.