Sierra Video 3232HD-3G - Manual (Page 51)

ASPEN 1616 AND 3232HD/SDI 3G ROUTING SWITCHER
41
For example, to set IP address is 192.168.1.251
 Press and hold the FUNC until it turns BLUE.
 Press Output Button 26 on the Aspen 32x32 or Output Button 10 on the Aspen
16x16. This button will turn blue.
 Press OUTPUT 1 button
• Press input 1
• Press input 9
• Press input 2. The Take button is now blinking.
• Press Take
 Press OUTPUT 2 button
• Press input 1
• Press input 6
• Press input 8. The Take button is now blinking.
• Press Take
 Press OUTPUT 3 button
• Press input 10
• Press input 10 again
• Press input 1. The Take button is now blinking.
• Press Take
 Press and hold the FUNC. Then press OUTPUT 4 button.
• Press input 2
• Press input 5
• Press input 1. The Take button is now blinking.
• Press Take
Reset the IP address only to Factory Default
To reset IP address, subnet and gateway of the routing switcher without changing any
other of the routing switcher settings or conditions;
 Press and hold the FUNC until it turns BLUE, while holding the FUNC button.
 Press and hold Input Button 25 on the Aspen 32x32. (Button 9 on the Aspen
16x16)
 The Input Button will be BLUE.
 The TAKE button blinks RED.
 While continuing to hold the FUNC button and the input button, press the TAKE
button to execute. Routing switcher will be reset to Factory IP defaults.
Button Brightness
To set the front panel button brightness;
 Press and hold the FUNC until it turns BLUE.
 Press the Salvo button while holding the FUNC button.
 Output buttons 1-8 will be green.
 One of the Input buttons 1 through 16 will be GREEN to indicate the current
brightness setting.
 Press Input buttons 1 through 16 to select the brightness setting. Output buttons
1-8 will change to indicate the brightness setting.