Sierra Video 3232HD-3G - Manual (Page 25)

ASPEN 1616 AND 3232HD/SDI 3G ROUTING SWITCHER
15
If a valid input signal is detected, it will be indicated as “Present”.
The “Rate” column indicates the signal type detected at the input.
If the input is missing, the rate will be “Unknown”.
Note:
If the signals you are connecting to the Aspen routing switcher inputs have a bit rate < 125Mbps,
you may want to set the Equalizer mode to Bypass if you find you have bit errors in the video.
This should not be a requirement for most low bit-rate signals.
Warning!
Changes to this screen could adversely affect operation of the routing switcher.