Button lamp test – Sierra Video 3232HD-3G User Manual
Page 47

ASPEN 1616 AND 3232HD/SDI 3G ROUTING SWITCHER
37
Button Lamp Test
1) On power up, press and hold input button 1 until all GREEN LEDs turn on
2) For input button 1, pressing the button will go through the following sequence
a. All BLUE LEDS on
b. All RED LEDS on
c. All LEDs off
d. Input button 1 GREEN LED on
e. Input button 1 BLUE LED on
f.
All GREEN LEDs on
g. Go back to step a.
3) For all other buttons, each press of the button will cycle through each LED supported
by that button and off. If you continue to push the button, it will then repeat the
sequence. For example, if input button 2 is off, pressing it will go through the
following sequence.
a. GREEN
b. BLUE
c. off
d. Go back to step a.
4) To exit test mode, remove and re-apply power to the unit.