Teac RC-601MKII - Manual (Page 24)

24
TASCAM RC-601MKII
OUTPUT-RELATED SETTINGS
Setting the Terminals for Online
Output
The BALANCED analog output terminal and AES/EBU
digital output terminal are basically provided as terminals
for online output. In the default setting, both of the monitor
playback signals and online playback signals are output
from these terminals. However, by using menu item No. 02
(“ON LINE”) you can set so that only the online playback
signal is output from these output terminals.
OFF (default setting):
Audio signals are output from the BALANCED analog output
terminal and AES/EBU digital output terminal during both
online playback and monitor playback.
ON:
Audio signals are output from the BALANCED analog output
terminal and AES/EBU digital output terminal only during
online playback.
Setting the Terminals for Monitor
Output
The UNBALANCED analog output terminal and SPDIF
digital output terminal are basically provided as terminals
for monitor output. In the default setting, both of the monitor
playback signals and online playback signals are output
from these terminals. However, by using menu item No.
03 (“MONI”) you can set so that only the monitor playback
signal is output from these output terminals.
OFF (default setting):
Audio signals are output from the UNBALANCED analog
output terminal and SPDIF digital output terminal during
both online playback and monitor playback.
ON:
Audio signals are output from the UNBALANCED analog
output terminal and SPDIF digital output terminal only during
monitor playback.
Setting Stereo/Monaural
The playback output signal can be set to monaural.
Set monaural using menu No. 8 (“OUTPUT”).
Selection: ST (stereo, default setting), MONO (monaural)
Setting the Output Level
You can select the maximum output level of the BALANCED
analog output terminal.
Set the maximum output level using menu No. 09 (“OUT_L”).
Selection: +24 (default setting), +22, +20, +15 (dBu)
RC-601MKII_Eng.indd 24 3/24/2005 2:38:22 PM